ELECTRIC AIR COMPRESSORS

 BLAST MACHINES (BLAST POTS)   BLAST CABINETS     PORTABLE AIR COMPRESSORS    BLAST ROOMS    DUST COLLECTORS   ELECTRIC AIR COMPRESSORS AND DRYERS    OPERATOR SAFETY EQUIPMENT    COMMERCIAL TRUCKS     FORKLIFTS/MANLIFTS

AUTOMATED SYSTEMS   LOADERS    MEDIA RECLAIM SYSTEMS      METALWORKING MACHINERY    VIBRATORY TUMBLERS AND MILLS

MISCELLANEOUS EQUIPMENT    VACUUM BLAST EQUIPMENT    SODA BLAST SYSTEMS    PLASTIC MEDIA   TRACTORS

REPLACEMENT ENGINES AND ACCESSORIES    

TERMS AND CONDITIONS

Electric air compressors are ideal for plant air applications, where the compressor is stationary and will not be moved.  Blast cleaning is one of many obvious applications for required compressed air.  Selection of the proper compressor is essential for a productive blast system.  C.f.m. or "cubic feet per minute" is the main criteria for requirements.  I.E. a 1/4" nozzle or #4 nozzle, require 100 c.f.m. to operate, most compressors operate at standard 100 p.s.i. (pounds square inch) not to be confused with c.f.m.  A 25 horse power compressor typically provides 100 c.f.m. at 100 p.s.i. this is a minimum requirement for production blasting.  For semi production blasting, smaller compressors/nozzles may be utilized.  Please contact us for selection of the proper system for your application.

NOTE: Most electric air compressors above 20 h.p. require 3 phase electric, this is NOT 220 volt single phase current,  3 phase is industrial/commercial electric.  To utilize a 3 phase compressor with 220 volt single phase requires a phase converter, available through our company or others.

  Some experienced with blast equipment will be able to identify the proper machine for their application. However, should this equipment seem somewhat confusing to negotiate, or you are an admitted novice, please do not hesitate to contact our facility for suggestions, questions, or additional information.  Selecting the proper system is essential in obtaining the ultimate production.  The machines found within these pages are production type systems, not "homeowner" or occasional use machines.  Please allow us the opportunity to select a system that is correct for your application.

Prior to contacting us, some helpful suggested information will assist us in selection of a unit:

• 1.  Air required for your application: c.f.m. & p.s.i.

• 2.  Available electric:  3 phase, 208, 230 or 480 volt available 

• 3.  Additional items utilized with compressor: I.E. grinders, machines etc. and their consumption (if applicable)

General knowledge of your application prior to contacting us is extremely helpful in selection of a unit.

Please contact us at (570)648-4774

 CONTINUE TO ELECTRIC AIR COMPRESSORS

**CONTACT US**

MAIN OFFICE/ FACTORY