PORTABLE AIR COMPRESSORS

 BLAST MACHINES (BLAST POTS)   BLAST CABINETS     PORTABLE AIR COMPRESSORS    BLAST ROOMS    DUST COLLECTORS   ELECTRIC AIR COMPRESSORS AND DRYERS    OPERATOR SAFETY EQUIPMENT    COMMERCIAL TRUCKS     FORKLIFTS/MANLIFTS

AUTOMATED SYSTEMS   LOADERS    MEDIA RECLAIM SYSTEMS      METALWORKING MACHINERY    VIBRATORY TUMBLERS AND MILLS

MISCELLANEOUS EQUIPMENT    VACUUM BLAST EQUIPMENT    SODA BLAST SYSTEMS   PLASTIC MEDIA    

REPLACEMENT ENGINES AND ACCESSORIES    


TERMS AND CONDITIONS

 

 

All portable air compressors listed are rotary screw type, diesel powered, all tested and fully operational.  Blast cleaning is one of many obvious applications for required compressed air.  Selection of the proper compressor is essential for a productive blast system.  C.f.m. or "cubic feet per minute" is the main criteria for requirements.  I.E. a 1/4" nozzle or #4 nozzle, requires 100 c.f.m. to operate, most compressors operate at standard 100 p.s.i. (pounds square inch) not to be confused with c.f.m.  A 25 horse power compressor typically provides 100 c.f.m. at 100 p.s.i. this is a minimum requirement for production blasting.  For semi production blasting, smaller compressors/nozzles may be utilized.  Please contact us for selection of the proper system for your application.

  Some experienced with blast equipment will be able to identify the proper machine for their application. However, should this equipment seem somewhat confusing to negotiate, or you are an admitted novice, please do not hesitate to contact our facility for suggestions, questions, or additional information.  Selecting the proper system is essential in obtaining the ultimate production.  The machines found within these pages are production type systems, not "homeowner" or occasional use machines.  Please allow us the opportunity to select a system that is correct for your application.

Prior to contacting us, some helpful suggested information will assist us in selection of a unit:

  • 1.  Air required for your application: c.f.m. & p.s.i.

  • 2.  Available electric:  3 phase, 208, 230 or 480 volt available 

  • 3.  Additional items utilized with compressor: I.E. grinders, machines etc. and their consumption (if applicable)

General knowledge of your application prior to contacting us is extremely helpful in selection of a unit.

Please contact us at (570)648-4774

 

 CONTINUE TO PORTABLE AIR COMPRESSORS

 

RETURN TO HOME PAGE

**CONTACT US**

MAIN OFFICE/ FACTORY

TITAN ABRASIVE SYSTEMS, INC.
308 VALLEY ROAD, PITMAN, PA 17964
PHONE: (570) 648-4774 *  FAX: (570) 648-8371
E-MAIL: titaninc@pa.net
MEDIA BLAST/TRAINING FACILITY
TITAN ABRASIVE SYSTEMS, INC.
30 ROGERS ROAD
FURLONG, PA 18925      
MIDWEST FACILITY
TITAN ABRASIVE SYSTEMS, INC.
LOGANVILLE, WI 53943